DiveRite TransPac XT/Voyager XT Wing Dive Package with 16lb Weight Pockets
Processing...

DiveRite TransPac XT/Voyager XT Wing Dive Package with 16lb Weight Pockets

Code: bcd252

$829.00
Free Shipping on DiveRite TransPac XT/Voyager XT Wing Dive Package with 16lb Weight Pockets

SHIPS FOR FREE



Qty

Product Description

•••••
This is the DiveRite TransPac XT/Voyager XT Wing Dive Package with 16lb Weight Pockets

Features:

TransPac XT
  • Soft backplate constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance
  • Marine grade stainless sideplates provide custom fit and performance depending on placement at waist
  • Shoulder straps feature pivot rings at chest level for load distribution and acetyl resin quick release buckles for easy doff and don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations.
  • Two-inch (50 mm) nylon webbing rated at 7,000 pounds breaking strength forms the shoulder and waist straps.
  • Dual, 36-inch cam straps with lightweight marine stainless buckles
  • Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness and provide maximum security.
  • Weight XS:4 lbs 4 oz (1.92kg), Sm:4 lbs 4 oz (1.95kg), Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg), XXL:4.93lb (2.23kg),
  • Made in the U.S.A.

Voyager XT Wing
  • Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diverís side panel (extremely resistant to pinches and punctures)
  • Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
  • Wing Gusset Control system for streamlining
  • Lift: 35 lbs. (15.8 kg)
  • LP inflator hose
  • 16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow
  • Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
  • Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
  • Weight: 2.8 lbs. (1.27 kg)
  • Size: 22-in. H x 19-in. W (55.8cm x 48.3cm)
  • Made in the USA

16 lb Weight Pockets
  • Holds up to 8 lbs (3.6 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo.
  • 1680 denier ballistic nylon fabric is tear and abrasion resistant.
  • Two-inch (50.8 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place.
  • Acetyl quick buckle is used to easily secure the pocket in the holster.
  • Nickel plated brass grommets resist rust and corrosion.
  • 9-in high x 3.5-in wide x 1.5-in deep (22.9 cm x 8.9 cm x 3.8 cm)
  • 12 oz (340.2 g)
  • Made in the U.S.A.