Hollis Side-Mount System SMS 75 Complete BC/BCD Harness

This is the Hollis Side-Mount System SMS 75 Complete BCD Harness

Features:

• Designed for Side-Mount Cave Divers, Beginner, Advanced or Technical Divers
• Suitable for: Side Mounting Twin or Single Cylinders or Rear Mounted Singles
• System Uses: Any-Environment from Open-Water to the Overhead Environment
• System is Ready-to-Dive Out-of-the-Box
• Bulletproof Constructed System Allows Full Visibility Over-your-Gear
• Diver Can Perform:
• Gas Checks/Management
• Configure & Monitors All Gauges, Valves & Hoses w/o Assistance
• Streamlines Profile, Reduces Drag, Increasing Bottom Time
• Harness:
• 5-Stainless Steel D-Rings on Padded Shoulder Straps
• 4-Pre-Bent for Accessory Attachment
• Adjustable Shoulder and Sternum Straps
• Shoulder &Sternum Straps: Squeeze-Style Side-Release Buckles for Easy Donning & Doffing
• Stainless Steel Latch-Style Waist Buckle with Adjustable Crotch Strap
• Crotch Strap: Additional Stainless-Steel D-Rings for Attachment of Accessory or Scooter
• All Hardware Manufactured from 316- Marine-Grade Stainless Steel
• 360° Elastic Bungee System (removable) Wing
• 35 lbs. (15.88 kg) of Lift Capacity
• Centrally-Located Inflator Mechanism Elbow: Avoid Tank Valve/Regulator Interference
• Lower Left Pull Dump/Overpressure Relief Valve
• Hollis Inflator System:
• Durable Impact Resistant Plastic Housing
• Corrugated Rubber Hose
• Internal Components & Inlet QD Nipple made from Chrome Plated Brass
• Low Pressure 3/8" Threaded Quick-Disconnect Hose
• Cam Slots for Single Tank and Grommets at 11" (27.9cm) for Banded Doubles
• Reversible Inflator Positions

The Hollis Side-Mount SMS75 is an evolution from years of side-mount development, which started with the SMS100. The Hollis Side-Mount System is a product that has been copied, modified and a benchmark for technical side-mount for years. Even more popular has been the lightweight SMS50 line. These two have taken side-mount mainstream and the building blocks this new harness. While it caters more to hardcore cave divers, SMS75 was created to handle all environments. Proper trim is key in side-mount diving and the wing is designed with a trapezoid shape to promote horizontal diving with increased lift towards the hips where it's needed most, and without modification. The SMS75 will also support rear mounted tanks with cam slots for single tank and grommets at 11" (27.9cm) for banded doubles and reversible inflator positions. "

Warning - California Prop 65: Some products on this site can expose you to chemicals including Chloroprene, which is known to the state of California to cause cancer and birth defects or reproductive harm. For more information, go to www.P65Warnings.ca.gov.