Apeks ATX40 Scuba Diving Regulator

This is the Apeks ATX40 Scuba Diving Regulator

Features:

• Highly Technical Design
• Braided 3/8 Flexi-Hose
• Total Weight: 39.86 oz. (1130 g)
• Nitrox Ready Up to 40% O2 Out-of-the-Box
• Suitable for Cold Water Use Below 50°F (10°C)
• First Stage: APEXS ATX40 DS4:
• Unique Over-Balanced Diaphragm First Stage
• Chromed Marine Grade Brass Construction
• Environmentally Sealed to Keep-Out Contaminates
• Delicate Internal Parts Not Exposed to Contaminants: Salt, Sand, Chlorine or Pool Acids
• Requires Less-Maintenance
• Secondary Environmental Diaphragm Membrane:
• First Stage Completely-Sealed-Off
• Dry Ambient Pressure Chamber
• Second-Layer of Corrosion Resistance and Prevention of Freezing in Cold-Water-Use
• Four 3/8" UNF (Unified National Fine) Medium Pressure Ports
• One 7/16" UNF High Pressure Port
• HP & MP Ports Angled for Optimum Hose Routing
• Second Stage: APEXS ATX40
• Pneumatically-Balanced Second Stage
• Smooth, Easy Breathing

The APEXS ATX40 uses the DS4 first stage. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. An environmental dry system keeps water out of the main spring chamber thus preventing ice build-up and keeping silt and contamination out. The chromed marine brass first stage has four medium-pressure (3/8" UNF) ports and one high-pressure port (7/16" UNF). "

Warning - California Prop 65: Some products on this site can expose you to chemicals including Chloroprene, which is known to the state of California to cause cancer and birth defects or reproductive harm. For more information, go to www.P65Warnings.ca.gov.